{"id":1342,"date":"2021-01-06T11:51:51","date_gmt":"2021-01-06T11:51:51","guid":{"rendered":"http:\/\/collaboriscom.wpengine.com\/?p=1342"},"modified":"2024-08-06T12:48:34","modified_gmt":"2024-08-06T12:48:34","slug":"standard-operating-procedures-a-complete-guide-test-adjust","status":"publish","type":"post","link":"https:\/\/www.collaboris.com\/standard-operating-procedures-a-complete-guide-test-adjust\/","title":{"rendered":"Standard Operating Procedures Guide \u2013 Test & Adjust"},"content":{"rendered":"<\/p>\n

Standard Operating Procedures Guide \u2013 Test & Adjust<\/h1>\n

Welcome back to the 5th in our series of blogs<\/a> describing the Key elements in the SOP lifecycle. So far we have introduced the \u2018SOP pie\u2019 and worked through the first half and hopefully got to the stage where we now have a the first draft of the SOP. This blog will dig further into the first step of the second half of the pie which is all about getting the SOP out there and used by your audience\u2013 Test & Adjust<\/span><\/p>\n

\"The<\/span><\/p>\n

There would be no point in writing any SOPs, even going through all of the points we have covered so far, and then just pointing people to it on your SharePoint site and assuming it will work perfectly the first time. Nothing works perfectly the first time it is used, especially when people and interpretation are involved.<\/p>\n

__CONFIG_colors_palette__{“active_palette”:0,”config”:{“colors”:{“16871”:{“name”:”Accent Darker”,”parent”:”43816″,”lock”:{“saturation”:0}},”43816″:{“name”:”Main Accent”,”parent”:-1},”4592d”:{“name”:”Accent Lighter”,”parent”:”43816″,”lock”:{“lightness”:1,”saturation”:1}}},”gradients”:[]},”palettes”:[{“name”:”Default”,”value”:{“colors”:{“16871”:{“val”:”rgb(3, 3, 3)”,”hsl_parent_dependency”:{“h”:80,”l”:0.01,”s”:-0.05}},”43816″:{“val”:”rgb(171, 212, 107)”,”hsl”:{“h”:83,”s”:0.5497,”l”:0.6255,”a”:1}},”4592d”:{“val”:”rgb(244, 250, 235)”,”hsl_parent_dependency”:{“h”:84,”l”:0.95,”s”:0.58}}},”gradients”:[]},”original”:{“colors”:{“16871”:{“val”:”rgb(29, 23, 12)”,”hsl_parent_dependency”:{“h”:38,”s”:0.41,”l”:0.08,”a”:1}},”43816″:{“val”:”rgb(255, 204, 102)”,”hsl”:{“h”:40,”s”:1,”l”:0.7,”a”:1}},”4592d”:{“val”:”rgb(250, 246, 236)”,”hsl_parent_dependency”:{“h”:42,”s”:0.58,”l”:0.95,”a”:1}}},”gradients”:[]}}]}__CONFIG_colors_palette__ <\/p>\n

Are your standard operating procedures <\/span>read on time and by the right people?<\/strong><\/span><\/h3>\n

DocRead can help<\/p>\n

Show me how<\/span><\/span> <\/a> <\/p>\n

Test and Adjust<\/h2>\n

So as with most things it is best to go through a test and adjust phase with our SOP. You will have heard me say this with most of the stages of this lifecycle by now, and I am sure it will be said again, there is no one correct answer for achieving this, but there are some simple considerations to help achieve a successful outcome:<\/p>\n

    \n
  1. Firstly and probably most importantly, this is not a one off step, this should be an on going part of the process in itself. The SOP you have designed is there to achieve best practice at this time. However the SOP will need to grow and develop with time in order to remain relevant and meaningful. So in simplistic terms ensure the SOP is reviewed and updated on a regular basis and state how this is going to be achieved within the SOP. To achieve this it is worth utilising standard SharePoint<\/strong> functionality to setup regular reminders on your SOP documents. If distributing using DocRead<\/a>, don\u2019t forget to take advantage of the expiry date feature to help ensure only the up to date version of the document is being read.<\/li>\n
  2. Ensure that during testing the SOP is stepped through and carried out by the end user in a live or as close to live as possible working environment. There is little point doing this away from the expected working environment, it can generate false positives and negatives.<\/li>\n
  3. It should really go without saying, but there is little point in the person who authored the SOP carrying out the testing of it. When this happens the person ends up testing what they meant by the SOP rather than what the SOP actually states.<\/li>\n
  4. If time and environment allows then a pilot of the SOP is a good way to test it. Pilots can be used to carry out A\/B testing of different formats or approaches within the SOP.  Try each option and see what works best, then implement that.<\/li>\n
  5. Gain feedback from as many sources as possible during testing. A good way to achieve this would be to have the document in SharePoint<\/strong> and to distribute using add-on tools like DocRead<\/a><\/a> with a DocSurvey<\/a> attached to gather the comments and feedback.<\/li>\n<\/ol>\n

    Once we have tested our SOP all that remains is to finalise the documents in SharePoint and get ready to Distribute and Train<\/span> the relevant audiences on this SOP.<\/p>\n

    \"SOP<\/a><\/span><\/p>\n

    Get your free Standard Operating Procedures guide<\/strong><\/h3>\n

    Creating Standard Operating Procedures for your organisation doesn’t have to be complicated. This guide will introduce you to the whole lifecycle from creation to training and distribution.<\/p>\n

    __CONFIG_colors_palette__{“active_palette”:0,”config”:{“colors”:{“1bac0”:{“name”:”Main Accent”,”parent”:-1}},”gradients”:[]},”palettes”:[{“name”:”Default Palette”,”value”:{“colors”:{“1bac0”:{“val”:”var(–tcb-color-3)”,”hsl”:{“h”:196,”s”:0.99,”l”:0.3745,”a”:1}}},”gradients”:[]},”original”:{“colors”:{“1bac0”:{“val”:”rgb(19, 114, 211)”,”hsl”:{“h”:210,”s”:0.83,”l”:0.45,”a”:1}}},”gradients”:[]}}]}__CONFIG_colors_palette__ <\/span> Get your free eBook<\/span><\/span> <\/a> <\/p>\n

    See all of our free eBooks<\/a><\/p>\n

    Other articles in the series:<\/h6>\n